**Cold Feeds:**
This four-compartment cold feed system has 10’ x 8' top openings with bin extensions and dividers for added capacity, along with a side walkway. The bins have 24” wide and 9’ long belt feeders powered by 3 hp A.C. motors. The collecting conveyor is 30” x 45'. A 24" x 45', 10 hp conveyor feeds materials up to the dryer.
**RAP System**:
This single-compartment recycle system has a 13’ x 8' top opening with a grizzly. The bin has a 24” wide and 9’ long belt feeder powered by a 3 hp A.C. motor. The intermediate feed conveyor is 30” x 30' and feeds a double roll Gentec RAP Gator, which sits over a 3' x 8' single deck scalping screen (screen removed). A 30" x 60', 10 hp weigh bridge conveyor feeds materials up to the dryer.
**Dryer:**
The collector conveyor delivers materials to a gravity chute with a reject chute on the dryer breaching. The dryer shell is in excellent condition, with a .425 average thickness. The assembly is 8' in diameter and 30’ long. The flights are in fair condition. The chain drive system is powered by a 75 hp motor through a Rex gearbox. A Hauck SJO 360 burner with a 75 hp blower operates on diesel or natural gas with a Maxon gas train.
**Hot Elevator and Batch Tower:**
The vertical hot aggregate bucket elevator uses a double-strand 6” pitch roller chain with 10” x 18” buckets. A 25 hp motor powers the bucket elevator. The batch tower is a Cedarapids (G 60A) 6,000 lb. unit. The Deister screen deck is inclined with 4 1/3 decks and is powered by a 30 hp motor. There are four hot bins. The pugmill has a capacity of 6,000 lbs and is driven by a 100 hp motor. The arms, tips, paddles, and liners are in fair condition.
**Dust Control:**
Dust control is provided by a large vertical cyclone over the dryer. Fines from the knockout box are returned to the hot elevator via a chute. The baghouse is a Standard Havens Size 28 pulse jet design. The bags are 6” in diameter and 16’ long, with approximately 12,096 sq ft of cloth rated at 63,000 acfm at 5.5-1. The Astec fan is powered by a 200 hp motor. The baghouse is complete with all ductwork, an automatic outlet damper, and a stack with a test platform. Dust is removed from the baghouse via a single auger through a rotary vane feeder and then taken to the hot elevator via an additional auger. A later model Quincy screw-type air compressor with a surge tank is included. The baghouse is in above-average condition.
**Liquid AC System:**
There is a Heatec HAO-32S (SN# 64020 / 3-84) 32,000-gallon direct-fired/coiled skid-mounted liquid asphalt tank with a 20 hp plant pump and a 20 hp unloading pump. All plumbing is included. A Heatec HC 120 dual fuel hot oil heater is also included.
**Fuel:**
A skid-mounted double-wall fuel tank with plumbing is included.
**Silo System:**
A Standard Havens 200-ton asphalt storage system is included. The silo is insulated and skinned, with a round gob hopper and dual clamshell gates. The 400 TPH drag conveyor with 32" slats and double chain is portable, with a midpoint reject gate (there is no heat on the floor). A 10' x 60' set of portable steel deck weigh beam scales are used to weigh the trucks.
**Control House and Controls:**
The control house is a site-built, two-level building and is not moveable. **The controls are newer Astec batch plant blending controls that need to be installed (They are partially installed now)**. Astec weigh mate loadout controls and Astec BC 3300 burner controls. The motor control center is located downstairs, with individual breakers mounted on the wall.
**Miscellaneous:**
This equipment is immediately available. The original partial parts book for the plant is included, along with books for the Astec controls. A few spare parts are available.
## AS IS, WHERE IS
**PLANT STILL ERECTED AND PROPER INSURANCE IS REQUIRED FOR TAKEDOWN**
**MAKE REASONABLE OFFER, PLANT MUST BE REMOIVED OFF SITE ASAP**
**PLANT MUST BE SOLD OUT OF THE STATE OF TN**
