**Manufacturer:** Port-A-Pour
**Model:** Series II
**Serial Number:** 78PZ1101
12-Yard Dry Batch Plant
Still erected
Two silos (one on the main plant and one portable horizontal silo)
10,000-gallon portable water tank
Single feed
8' × 20' Conex control house with heat, air conditioning, and quick disconnects
ACT batching controls
Trailblazer 486
S/N: 1172 (Division of Stevens Concrete)
Currently set up for operation (ready to work)
Plant received all new wiring, motors, and VFDs in 2024
The Port-A-Pour Series II is a highly efficient, mobile concrete batch plant mounted on a single trailer. It is designed to produce high-specification concrete on-site at a maximum production rate of 70 to 80 cubic yards per hour.
**Port-A-Pour Series II – Main Plant**
Maximum production rate of 70 to 80 cubic yards per hour
Overall dimensions: 74' long, 12'3" wide, 14'6" high
Approximately 60,000-pound empty weight
Total approximate ready-mix production since purchase: 15,000 cubic yards
15-cubic-yard sand and rock bins with feeder belts to the blender box, driven by variable-speed drives for proportional delivery
Twin-shaft blender for combining cement with aggregates prior to the addition of water. Blending reduces potential cement clumping and sand balling while producing consistent concrete. The wear shoes on the blender blades are new.
55,000-pound-capacity onboard silo with air slide
In-frame auger for delivery to the blending box with a 10 HP variable-speed drive
Primary power requirements: 480-volt, three-phase, 125 kW minimum service using generated or utility power
All motor starters, variable frequency drives (VFDs), and electronic controllers are protected in NEMA enclosures
230-gallon-per-minute water pump
Auxiliary water pump for filling saddle tanks
Adjustable-height main delivery conveyor with a 24-inch-wide belt × 40 feet long, equipped with a soft starter
**Auxiliary Silo**
112,000-pound-capacity with air slide
Auger delivery to the blending box on the main plant with variable-speed drive
Loads
Main plant (portable, tandem axle)
Auxiliary silo (tandem axle)
Water tank (tandem axle)
Feed bin and conveyor (skidded)
Control room (skidded)
Specifications and condition are based on ASI's best knowledge at the time of listing and are believed to be accurate; however, they are estimates only and are subject to verification upon final inspection. Information, dimensions, equipment details, and condition are subject to change without notice.