Asphalt Plant Equipment For Sale - New & Used Asphalt, Concrete & Crushing Plants

### Gencor AF-40 Oil Burner **Make:** Genco **Model:** AF-40 **Size:** approx. 70MBTU **Other Info**: * Recently repainted * 40HP motor included * On stand

**Make**: Hauck **Model**: ES II Burner **Output**:100,000,000 BTU **SN#**: SEII O/G100-111-01-09-0-00 **Year**: 2009 **Oil/Gas** (with Gas Train)

Burner Make: Hauck Burner Model: SJLP 4200E-112-06-06-1-00 Burner PRN: 25718 Blower Make: Hauck Blower Model: TBA 24-20-0-2 Blower SN: 891537

Industrial Burner Serial: 35810-1 Model: LNDLG-145P-A Mbtu: 14,700 Motor on Fan: 15hp Combo Burner (Oil/Gas) Complete Unit Reliable Built Controls (New On Pallet) Industrial Combustion "D" series burners are performance proven in boiler, heater, furnace, kiln and dryer applications worldwide. The standard D series offers natural gas, propane gas, air atomized #2-6 oil and combination gas/oil fuel options at capacities from 4,200,000 to 42,000,000 MBTU/Hour. The low NOx D series offers natural gas, propane gas, air atomized #2 and #6 oil, and combination gas/oil fuel options at capacities from 3.4 to 42.0 MMBTU/Hour. A true forced draft design provides the ability to deliver rated capacities against furnace pressures up to 4? W.C. Features Include: Low-pressure air atomizing system on oil rotary vane compressor Cam trim with 14-point adjustment range for consistent air/fuel ratios Parallel positioning available for optimal control through out the firing range Low NOx with FGR capabilities Piston-type positive displacement oil metering system Gas manifold on oil burners standard for easy upgrade to combination units Hinged combustion head for easy access and maintenance Backward-curved impeller provides adequate combustion air for various furnace pressures Nozzle line electric heater standard on medium to heavy oil burners FGR modulating valve UL & cUL listed

Astec Year-2016 55MBTU/Hr Phoenix PF50 Burner Gas Train Control Panel Never Installed Fuel: Natural Gas Burner Assembly (PF-50D-G)(C/L 2'-0'')480/120/60 DWG#: FT02340 HP/KW: 50Hp/37.3Kw Plant voltage: 440/60Hz/3Ph New, Never Used. Has Been Sitting in a Warehouse

Make: Genco (Gencor) Model: Ultra II-25 Output: 25mbtu Year: 2003 Running on Oil

**Make:** Hauck Burner **Model**: JBO4500x83 **PRN**: 21715 **Other:** * No Fan or motor * late 1980's model * 88MBTU

Make: Astec Fuels: #6 Oil Heating Value: Oil 142,000btu/Gal BTU Rating: 82.5 MMBTU/hr HP: 75hp

**Make**: Gencor **Model**: AF-60 **Tri-Fuel** **Other**: * Motor: 60hp * Partial Gas Train * Set Up On GAS

Gencor AF-50 Oil Burner Gencor AF-50 Oil Burner with 50 hp Baldor motor 230/460 V 3-phase 3525 RPM. Approx. 85MBTU Burner sold as is, no controls or fuel train.

**Make**: Cedarapids **Output:** rated approx 125MBTU **Gas** **Other:** * 75hp * Older Style

**Make:** Gencor **Model**: AF.75.60 **S/N**: 1214 **Output**: Rated Approx. 125MBTU **Combo** **Other**: * Combo: Oil/ GAS * Motor: 75 hp * With Base (Frame)

Make: Gencor Model: UF-2-85 SN: UF1255 Date: 3-19-92 80mbtu 4,600acfm

Make: Hauck ESIIG150-112-01-00-0-08 PRN: 28763 ESII150 Eco Star Natural Gas

Make: Hauck SJ0/G4580E-111-06-12-2-00 OPEN FIRE STARJET * W/12 0'CLOCK AIR ENTRY * PRN #15607 * SBI2212-HMC BLOWER SILENCER * TBA-36-100-0X-(*) L/MT BLOWER * DSCHG #5 460/3/60 * SERIAL #891148

1) Phoenix Burner #1 Model: PB-65U-B-G-O-SF Job Number/SN: 16088BURNER 16-088 This burner was sent to Astec for a rebuild and test fire. Unit has not been put into service after rebuild. Itemized list of upgrades done to convert burner to a total air/natural gas burner: * FLAME SCANNER AIR TRAIN * NEW FUEL ADJUSTABLE LINKAGE ASSEMBLY * SHEET 304SS 10GA (x8) * OIL GUIDE TUBE * ARM 6 1/2" LONG FOR EA57 W/1/2" SLOT * HOSE FLEX METAL 1/2` X 18 MNPT EA END SWIVEL 1 END * SWITCH PRESS 150 PSI INC 1/8 NPT VITON * SCANNER FLAME FIREYE UV1A6 * VALVE RELIEF HVJ-5R-XS 1" 60-175 PSI FULFLO * NOZZLE MIXER DMV-D PT-30/40/50 * LABOR * BURNER NOSE CONE SS (PB-65) 2) Phoenix Burner #2 Model: PB-65U-B-G-O-SF-FD-BB Job Number/SN: 007599 16-087 **PRICE IS FOR BOTH BURNERS. FOR INDIVIDUAL PRICING PLEASE CONTACT ASI**

Astec Burner Model: WJ-100U 100 MBTU Burner Combo: (#2 Oil/Gas) Year 2008 Job: 08 070 2206

North American Burner Size: 26T Type:100 (100 MBTU) Temp: 300 SN# S14364 100 HP Motor Set Up On Gas Missing a lot of parts

**Make**: Hauck esii200 **Year**: 2002 **Model**: es110/g200-222-01-06-03 **PRN#** 28743 **Output**: 200mbtu **Combo burner** **Other**: * Last ran on oil

**Make**: Gencor **Model:** UF-135 **SN**: UF-1192 **Year**: 1990 **Other**: * Gen 11 table top burner controls * RPM: 3600

HONEYWELL 28 Million BTU Gas Burner; Complete with the following major components and features: * Burns Natural Gas or Propane with a maximum of 22.4 M BTUs for propane. Turndown for a minimum of 0.70 MBTUs for natural gas and 0.56 MBTUs for propane. * Gas Train. * Factory Support Structure. * Operator’s Control Panel. Notes: * There are two of these identical units available. * These were ordered in 2019 and delivered in 2020 but never installed due to the buyer’s bankruptcy. The receiver has asked us to find buyer(s) for them. The price new in 2019 was $110,000 each. The estimated value new today is $125,000 each.

Hauck Burner Model# SJO 01580 E SN# 011040900 PRN 25755 Has Blower and 125 HP Motor with Housing (NO IMPELLER)

Whisper-jet 100MBTU no 2 oil burner and we have the preheating oil system for heavy oil. The burner was installed on a double barrel 8’’ X 38 400 t/h

**Make**: Gencor **Model**: AF-75 Burner **Motor:** 75 hp Blower Motor **Combo** **Other**: * Currently set up on oil

Make: Gencor Mode: E-135 SN: E-1724 CFM: 94,000 Year: 10-6-2006 Hp: 125 Plus a 4'' Eclipse Gas Train Gencor's Ultra II burner significantly reduces noise while providing total and efficient combustion of conventional fuels-whether oil, gas, or LP. With no refractory or combustion port requirement, the burner is completed sealed to the dryer providing faster heat-up and cool-down and low noise Provides improved fuel efficiency and lower emissions due to its patented flame shaping nozzle

**Make**: Gencor **Model**: AF-60 **Motor**: 60hp

Make: Gencor Model: AF-40 SN: AF-1232 CFM: 4,000acfm RPM:3 600 Year: 1993 Running on Waste Oil Low Hours Stand Alone Unit NO CONTROLS

**Make:** **Model**: **Output**: 20MBTU/hr ( has 8-1 turn down ratio) **Fuel**: Vaporous LP Gas **Other**: * 10hp * Siemens Gas Train Size: 3" * Supply Voltage: 460V/60Hz * Control Voltage: 120V/60Hz/1 * Control Transformer: 0.5 KVA * Flame Safeguard: Honeywell * Blower Motor: TEFC 460V/60Hz/60Hz/3 * Configuration: Upright * Panel Location: Remote Wall Mount * Junction Box Location: Top *Picture not actual burner, but a similar burner that company manufactures. New orders will take additional time to assemble and prepare. Current production time is 6 weeks.

**Make**: Hauck **Model**: SJL-G 4520-D-121-00-03-1-00 **PRN**: 221291 **GAS** (No Gas Train)

Make: Hauck SJO4750G-121-01-12-2-02 PRN27805 GY6496 Comes with new shell and fan

Hauck Burner LNSJO/G 4580F-111-01-06-1-02 SN C080552

**Make**: Gencor **Model**: AF-100 **S/N**: AF863 **Year**: 1987 **Combo** **Other**: * Combo: Oil/ GAS * 100 hp motor

**Make**: Gencor **Year:**1976 **Model**: FP-202 **S/N**: 3245-8 **Output:** 200mbtu **Other**: * NO BLOWER

**Make**: Gencor **Model**: Astroflame **Serial #**: AF 1531 **Output**: 100MMBTU **Oil Burning**: no gas head

**Make**: Hauck **Model:** Eco Star Burner **Output**: 150 MBTU **SN#**: ESG-1508-021-06-09-0-00 **PRN#**: 27200 **Natural Gas** **Other**: * 100 Hp Motor on Fan * Set Up To Run On Nat Gas * With Burner Controls (Under Tarp)

NEW BURNER CONTROLS MADE TO ORDER- CALL TODAY FOR THE QUOTE 1- Burner control will come with the following. ( stack and mix temp control, all safety wiring, Additional wiring or controls to operate a phoenix burner

Gen III Gencor Burner Controls Used MAKE OFFER

Gencor Burner Controls Stand Alone Gen 4 Controls SR# SAG4-123318-03-NA Model# 123153 15amp 1ph 60hz

**Make**: Gencor **Model:** Gen III **Burner Controls** **Baghouse Controls** **Other:** * Gencor Plant Control Panel * Baghouse and Burner Controls * Plant Start Stop Panels * Amp Gauges

**Make**: Gencor **Model**: GEN III **Other**: * Burner Controls * Table Top Controls * Auto Damping Controls * SO Cable Wires

**Serial No**. 3544N **Model:** Gen III **DWG No**. Dy6320 B **Volts** 110 **Frequency** 60HZ **Date or Manufacture**: 10-26-83 Auto Dampner Positioner Some spare parts

Combustion Chamber 27" 2/8ths Long 29" 2/8ths Small Side 18" 3/8ths Small Opening 38" 3/8ths Wide on Large Side 32" 7/8ths Big Opening MAKE OFFER

Combustion Cone Burner Make (Unknown) 43" Wide 38" Long 9.5" Cone Size

Maxon Gas Train 4" Valves Double Valve No Stand Both Valves Are Shut

**Make**: Maxon **Model**: 4" F 7000 2 x (2) **Other**: * Two (2) Maxon Valves * Both Valves in Closed Position * Gas reduction Valve * All on stand

Gas Train 2-4" Valves Both Show Closed Connected Together

Make: Maxon Model: 400CMA11-BA11-BB22A0 SN: 18031075 M.O.P: 40/2 FSI: 80/280 Gas Train Off of a new Hauck burner, taken off 2 years ago Has never been installed of used

(2) Gas Trains Available -One White -One Beige/Yellow Price is per unit